U-verse TV Equipment

Why is the number 5 on the remote different on s30-s1b? Does it have a special function?

I have purchased updated TV's. I can only get the HDMI hookups to work on the DVR box. My other additional boxes don't work with direct plug in. I have to use an RCA (red, yellow, white) to HDMI converter for the boxes to work with the TV HDMI hook up. WHY ?????? Am I doing something wrong. Even the

Uverse malfunctions many times daily - picture either freezes or goes black and then the dvr restarts. Unwatchable. Have checked all cabling and all signals. Have done non-disaster and disaster recovery. We need a replacement dvr box. This is for my dad - he's elderly and needs help. Would like to h

For the past several months our uverse will freeze and lose signal 5-6 times a day on all tvs. Have called tech support at least 3 times. Twice they did something in office and it worked ok for a few days. Last time a tech game out and replace modem and wiring. Worked ok for 24 hours and is back to

All lights on the main ATT box are lit yet the television says no signal. I have checked all wires and have done multiple resets to no avail.

I have cancelled my U-verse but am keeping internet. I want to make sure I am returning all the equipment necessary, i.e.: receivers, power cords and remotes. I will retain the gateway modem, the fiber modem and the wireless connector. Is this correct?

I’ve tried restarting my U-verse for a month… just my main receiver in great room and I’m getting a red X on the screen! Please help because I’ve tried resetting, restarting, checked all cable connections, switched HDMI cord and tried every imput hdmi connections, and I’ve had zero luck. my other re

I recently switched routers to a linksys E5350 and can't not figure out how to get the DVR to connect to it

I have estimated ATT in PSM using psmatch2 command. I get only the T-stat values for the ATT. How to determine the significance level? How to know whether I should use * or ** or ***? I ran the following command estimates table, star(.05 .01 .001) But it provides results for the unmatched sample onl

I started having an issue on one of my tv locations. I have the gateway in my den, and a wireless receiver in my sunroom and one in the bedroom. Either wireless receiver will boot up and work fine in the bedroom but neither will boot up in the sunroom. I will reboot and see "please wait" on the scre