New Member
•
2 Messages
Cannot display Directv on an HDMI matrix
I am using a HDMI matrix to push video from Directv, a computer and a firestick to a 4 tv video wall and a tv in the equipment closet. I have no problems viewing the firestick or computer but the Directv H44-500 box is another story. I can view DTV if it is direct into the video wall processor or small tv but not though the matrix.
I have changed input and output ports on the matrix and I have also swapped cables with known good sources so that eliminates everything but the matrix. I am suspecting an EDID issue. Would a EDID emulator or converter be the way to go?
I just inherited this mess so any help, ideas or suggestions would be greatly appreciated.
litzdog911
ACE - Sage
•
46.6K Messages
3 years ago
Most likely that "matrix" does not properly support HDMI HDCP copy protection signals. Do you have any documentation on that matrix?
0
0
mikew203
New Member
•
2 Messages
3 years ago
The "User Guide" states "HDMI 2.0b, HDCP 2.2 and HDCP 1.4 compliant". Sadly this user guide has no manufacturer name or tech support # to call.
0
0
sg_2025
New Member
•
1 Message
1 day ago
I know this is an older thread but did you happen to find a solution? I'm dealing with the same.
0
0
Juniper
ACE - Expert
•
23.3K Messages
19 hours ago
@sg_2025
As several things can change in a few years, best to start your own thread. Be specific to your issue, including model numbers of your boxes, and others can chime in with the best current guidance they can.
0
0